Kinze 3700 Front Folding Planter Rev. 7/14 User Manual
Page 25
TM
Model 3700
M0233-01
Rev. 10/11
2-15
Machine Operation
2. Hold “ROTATE/TONGUE” switch in “TONGUE” position while operating proper tractor hydraulic control to
completely retract hitch parallel linkage cylinder and lower hitch until wing wheels are on ground and hitch has
released from hooks on ends of wings.
3. Hold control console ROTATE/TONGUE switch in
rOTaTe and operate hydraulic control to unfold planter. Tongue
begins to retract and wings (supported by wing wheels) begin to unfold. Place tractor transmission in a low reverse
gear and slowly back up as planter unfolds. Center axle tires should remain stationary and wing tires should roll in
a continuous arc with minimal side loading on tires or their mounting structures. Hold switch in “ROTATE” position
until tongue cylinder is fully retracted.
NOTICE
Unfolding planter without using tractor to assist may cause equipment
damage especially in soft conditions or when loaded with seed or fertilizer.
Use tractor to reduce stress on frame, drive, and transport components.
hitch release from wing hook
planter unfolding