Landoll BPSB6 Till-N Seed - Manual (Page 44)

4-2 3P091
MAINTENANCE

WARNING
Lubrication
• Grease per recommended lubrication frequency
intervals indicated or if machine is not to be used for
some time. Greaseable components are the same on
each side, right side shown.
• Lubricate Roller Chains periodically with quality chain
oil.
For best penetration, lubricate chain immediately after
use while chain is still warm.
NOTE
It is good machine maintenance practice to check all
bolts for tightness during regular lubrications. Tighten any
fasteners that may have loosened during operation.
Figure 4-2: Lubrication (1 of 2)
Do Not Lubricate Machine While Machine Is In
Motion. If Any Guards Are Removed For
Lubricating, They Must Be Replaced Before
Operating.
8 Hrs
8 Hrs
25 Hrs
8 Hrs
Tillage Rotor
Bearing
Drive Rotor
Bearing
Rockshaft
Bearing
Rockshaft
Link
25 Hrs
Firming Roller
Bearing
25 Hrs
Tillage Rotor
Bearing