Landoll BPSB6 Till-N Seed - Manual (Page 5)

1-1
Chapter 1
Safety Information
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly,
maintenance and safe operation will allow this machine
to provide you with satisfactory use for seasons to come.

DANGER
Description of Unit
The Brillion Till 'N Seed is a tractor mounted, ground
driven, minimum till seeder designed to plant a variety of
seed into previously untilled or lightly tilled soil which is
relatively firm. It can also be used to lightly till soil without
seeding, de-thatch lawns, and shred tall dead grass. The
machine employs a drive rotor, followed by a tillage rotor
and finally a firming roller. Seed is dropped onto the
ground ahead of the drive rotor and is incorporated in the
soil by the tillage rotor.
NOTE
The machine shown in the following illustrations may not
agree with your unit. Your assembled machine, however,
is similar for all models. Additional parts identification and
location can be obtained by reviewing the parts catalog.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment, and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
• The information in this manual is current at time of
printing. Some parts may change to assure top
performance.
• Location reference: Right and Left designations in this
manual are determined by facing the direction the
machine will travel during field operation, unless
otherwise stated.
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts and
service equipment specially designed for Brillion
products. Your machine’s parts should only be replaced
with Brillion parts. Have the Serial Number and complete
Model Number available when ordering parts from your
Brillion dealer. See Figure 1-1.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered,
within 10 days of retail purchase, using the Landoll
Corporation Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
www.landoll.com for step by step
instructions regarding product registration.
Enter your product information below for quick reference.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
Figure 1-1: ID Plate
Read this entire manual before attempting to
assemble, adjust or operate this machine.
Failure to comply with this warning can result in
personal injury or death, damage
to the machine
or its components and inferior operation.