Landoll BPSB6 Till-N Seed - Manual (Page 7)

SAFETY INFORMATION
1-3
• Keep clear of overhead power lines and other
obstructions when transporting. Know transport height
and width of your machine.
• Install Rockshaft Lock Detent Pin and tighten
Rockshaft Clamp prior to tying it down onto trailer. See
Chapter 2 Operation. Failure to do so may result in tie
downs becoming loose and machine damage.
Attaching, Detaching, Storage
• Do not stand between the tractor and implement
when attaching or detaching implement unless both
are not moving.
• After attaching implement to the tractor and prior to
lifting the machine, loosed nut on Rockshaft Clamp
enough to allow movement and remove the
Rockshaft Lock Detent Pin. Insert Detent Pin in
storage hole on Rockshaft Arm. Raise stand
• Before detaching implement from the tractor, lower
machine to the ground and tighten nut on the
Rockshaft Clamp to prevent movement. Install
Rockshaft Lock Detent Pin if Rockshaft Lock Slot
aligns with Frame Tab Hole. Lower stand. See
Figure 1-2.
Figure 1-2: Rockshaft Lock
Rockshaft Clamp
Tighten Rockshaft Clamp
Nut to prevent movement
Insert Rockshaft
Lock Detent Pin