Overview – Lenze E94AZPP User Manual
Page 30
l
30
EDK94ZPP0364 DE/EN/FR/ES/IT 2.1
Overview
Scope of supply
Pos.
Description
0
Installation backplane
Mounting Instructions
Elements of the installation backplane
Installation backplane
1
Pos.
Description
X111
Mains (supply from above, e.g. from top filters)
DC−bus voltage (compatible with 9300 series)
X112
Mains (supply from below, e.g. from built−on filter)
External brake resistor
X109
DC−bus busbar +
Direct connection of
9400 axis modules,
device sizes 1 ... 3
X110
DC busbar −
6
EMC shield clamp
© 2010 Lenze Automation GmbH, Hans−Lenze−Str. 1, D−31855 Aerzen
No part of this documentation may be reproduced or made accessible to third parties without written consent by
Lenze Automation GmbH.
All information given in this documentation has been selected carefully and complies with the hardware and
software described. Nevertheless, discrepancies cannot be ruled out. We do not take any responsibility or liability
for any damage that may occur. Necessary corrections will be included in subsequent editions.