Lenze E82ZAFIC001 - Manual (Page 51)

Commissioning
Before switching on
7
EDK82ZAFIC−001 DE/EN/FR 5.0
51
l
H1inbet−bevor
7 Commissioning
Before switching on
(
Stop!
Before you switch on the standard device and the plugged−in function module
for the first time, check ...
ƒ the entire wiring for completeness, short circuit and earth fault.
ƒ the setting of the DIP switch S1 ( ^ 57):
– Setting for the last node = OFF
– Setting for all other nodes = ON