Setting for last bus node – Lenze E82ZAFIC001 User Manual
Page 57
Advertising
Commissioning
Setting for last bus node
EDK82ZAFIC−001 DE/EN/FR 5.0
57
l
H2_EinstellungLetzterTN−busteilnehmer
Setting for last bus node
DIP switch 1
ON
OFF
1
ON
2 3 4
E82ZAFI009
)
Note!
ƒ
DIP switch 1 must only be set to OFF for the last physical node.
ƒ
Lenze setting: all switches OFF
Position
Notes
OFF
Standard device with function module is the last bus node
ON
Standard device with function module is not the last bus node.
Advertising