Lenze E82ZMFBC001 User Manual
Page 48
Advertising
4 Mechanical installation
Wall mounting
EDK82ZMFBC-001 DE/EN/FR 7.0
48
H1_MechINS-E82ZMFB_BusIO
1
0
2
3
E82ZMFB007
8. Insert the bus-I/O function module
into the receptacle in the motec carrier housing
until it snaps into place.
9. Wire the bus-I/O function module.
– Plug the double-row pin strip of the flat flexible cable into the double-row socket
of the fieldbus function module
.
– Wire the terminals of the bus-I/O function module
, terminal assignment
52
).
10. Connect mains and motor (see Mounting Instructions for the 8200 motec).
– Connect PE conductor of mains cable to PE connection
.
– Connect PE conductor of motor cable to PE connection
.
Advertising