Commissioning using lenze settings – Lenze E82ZMFBC001 User Manual
Page 55
Advertising
Commissioning
Commissioning using Lenze settings
7
EDK82ZMFBC-001 DE/EN/FR 7.0
55
H1inbet-INB_01_warn
Commissioning using Lenze settings
Note!
The basic device is only functioning if a HIGH level is applied to X3/28
(controller release via terminal).
ƒ
Please observe that the controller can be inhibited through various
sources. All sources act like a series connection of switches.
ƒ
If the drive does not start in spite of the controller release via X3/28, check
if the controller inhibit is set via another source. Another source could be
the
key of the keypad.
Advertising