Lenze ECSEAxxx - Manual (Page 92)

Mechanical installation
Mounting with fixing rails (standard installation)
Mounting steps
4
l
92 EDKCSEX064 DE/EN/FR 6.0
4.2.2 Mounting steps
How to install the axis module:
1. Prepare the fixing holes on the mounting surface.
– Use the drilling jig for this purpose.
2. Take the fixing rails from the accessory kit in the cardboard box.
3. Push the rails into the slots of the heatsink:
– From above: Push in the long side.
– From below: Push in the short side.
4. Attach the axis module to the mounting surface.