Lenze 11.218 Variable speed pulleys - Manual (Page 10)

Safety instructions
MA 11.1023 DE/EN/FR 3.0
10

DUMMY_NUM_Reset-hinweis-fachpersonal_EN
0Fig. 0Tab. 0
GB

Please read these instructions before you start working!
Follow the enclosed safety instructions.

Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the ”Services & Downloads” area under
http://www.Lenze.com

Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material!
Safety instructions
ƒ Lenze drive components ...
– ... must only be used as directed.
– ... must never be commissioned in the event of visible damage.
– ... must never be technically modified.
– ... must never be commissioned before they have been completely mounted.
– ... must never be operated without the covers required.
– ... can - depending on the degree of protection - have live, movable or rotating
parts during operation. Surfaces can be hot.
ƒ For Lenze drive components ...
– ... use only the accessories approved.
– ... use only original spare parts from Lenze.
ƒ Observe all specifications given in the attached documentation.
– This is the prerequisite for safe and trouble-free operation and achieving the
specified product features.
ƒ Only qualified personnel may work with and on Lenze drive components.
According to IEC 60364 and CENELEC HD 384, these are persons ...
– ... who are familiar with the installation, assembly, commissioning and operation
of the product.
– ... who have the corresponding qualifications for their work.
– ... who know all regulations for the prevention of accidents, directives and laws
applicable on site and are able to apply them.