MK Diamond MK-100 JCS - Manual (Page 11)

MK-100 JCS Tile Saw Revision 06/05, Effective Date June 27, 2005 Page 11
UNPACKING, TRANSPORT, UNIVERSAL STAND and ASSEMBLY
UNPACKING:
Your MK-100 has been shipped from the factory thoroughly inspected. Only minimal assembly is required.
Use proper lifting techniques when lifting the MK-100.
If not done, remove the MK-100, Cutting Head and accessory box from the carton.
CONTENTS:
In your container, you will find one (1) MK-100 frame and water basin, one (1) MK-100 Cutting, one (1) 10-
inch wet cutting continuous rim diamond blade, one (1) adjustable cutting guide, one (1) electric water pump,
one (1) pump discharge fitting, one (1) cooling transfer tube, one (1) flow adjusting clamp, one (1) drain plug,
one (1) blade wrench, one (1) Table Clip, one (1) splash guard, one (1) owners manual, one (1) pump manual
and one (1) warranty card.
MK-100 Frame
and Water Basin
MK-100
Cutting Head
Diamond Blade Adjustable
Cutting Guide
Water Pump Clamp
and Wing Screws
Electric
Water Pump
Pump
Discharge Fitting
Cooling
Transfer Tube
Flow
Adjusting Clamp
Drain Plug
Blade Wrench and
Table Clip
Splash
Guard
Owners
Manual
Pump
Manual
Warranty
Card
TRANSPORT:
1. The MK-101 weighs approximately one hundred and twenty eight (128) pounds.
2. Never transport the MK-101 with water in the Water Basin.
Cutting Head
Handle Wheels
Lift the saw using the handle.
Follow instructions on page 12.
Casters