MK Diamond MK-112 - Manual (Page 12)

12
UNPACKING, TRANSPORT and ASSEMBLY
UNPACKING
Use proper lifting techniques when lifting the MK-112
If not done yet, remove the MK-112 Saw and accessory box from the carton.
CONTENTS
TRANSPORT:
1. The MK-112 weighs approximately ninety-one (96) pounds; use care when transporting.
2. Never transport the MK-112 with water in the water pan.
The MK-112 is easy to carry by using the specially provided side handles.
Before carrying the machine make sure that:
* the motor slide is locked in place with the two Cutting Adjustment Knobs on the slide rail;
* the motor slide is completely lowered and locked with the locking lever;
* the machine is in the 45° position and that the Angle Adjustment Knobs are properly tightened;
* the feet are closed and the leg lock pin inserted.
In your container, you will find
A. One (1) MK-112 Saw
B. One (1) 8-inch wet cutting continuous rim blade,
C. One (1) Water Pump
D. One (1) 5mm wrench
E. One (1) 19mm wrench
F. One (1) 5mm Allen key
G. One (1) Protractor/Cutting guide
H. One (1) Side Table
I. One (1) owners manual and
J. One (1) warranty card.
A
Cutting Adjustment
Knobs
H I J G
D,E,F C B
CAUTION
CAUTION