MK Diamond MK-112 - Manual (Page 20)

20
MAINTENANCE AND TROUBLESHOOTING
Like most cutting tools, a diamond blade performs best when it is dressed. Over time and use, diamonds on the
outer edge of the blade will become smoothed or “glazed” over.
This will reduce grinding efficiency and may cause the blade to “wander” or bend giving the illusion of an
alignment problem. When this occurs, the blade will need to be dressed.
The diamond blade can be dressed using the MK Dressing Stick (part number 152792) and by following the
steps below.
3. Blade Dressing
(B)
Position the Dressing Stick
(A)
Setup the MK-112 for
operation
(C)
Cut the Dressing Stick 7 or 8
times to dress the Blade