MK Diamond MK-112 - Manual (Page 13)

2. Raise the leg by sliding it inside the slot.
3. Repeat the operation for the front side of the machine (See Picture 2)
4. Insert the tube-holder rod in its seat (See Picture 3).
Should it be necessary to disassemble the machine, carry out the above operations in reverse order.
PICTURE 1
PICTURE 2
PICTURE 3
13
UNPACKING, TRANSPORT and ASSEMBLY
ASSEMBLY:
Remove the machine from the packaging with the aid of the side carrying handles.
To set up the machine for work proceed as follows:
1. Remove the leg lock pin and raise the rear side (pump side) of the machine with the handle until the leg is
fully extended (See Picture 1).