MK Diamond BX-3 - Manual (Page 25)

25
6. Protective Wooden Strip Replacement:
The protective wooden strip is to protect the Movable Cutting Table from damage during operation. Over
time, the wooden strip will become grooved from use. A grooved wooden strip will not support masonry
during cutting, causing the blade to "break through" the piece instead of performing a smooth cut (MK
Diamond Part No. – 156427).
Phillips
Screwdriver
(A)
Place Movable Cutting Table on
Work Bench – Wheels Up
with Roller Wheels Up
(B)
Remove the Two Protective
Wooden Strip Retaining Screws
(C)
Place Movable Cutting Table on
Work Bench – Wheels Down
(E)
Place Movable Cutting Table on
Work Bench – Wheels Up,
Reinstall Retaining Screws
(D)
Replace Worn
Protective Wooden Strip
(F)
Install Movable Cutting Table
Protective
Wooden Strip
Roller Wheels Retaining Screw
Worn Wooden
Strip
New Wooden
Strip
Phillips
Screwdriver
Retaining Screw
Install Movable Cutting
Table (See Setup,
Adjustment and Operation
BX-3 MAINTENANCE