Mk-1600 cleanup – MK Diamond MK-1600 Series User Manual
Page 21
21
MK-1600 CLEANUP
Cleanup
Engine parts are extremely hot following use, allow engine to cool 1/2-hour before
cleaning. Use care during cleanup to avoid injury.
CAUTION
1. To extend operating life, the Concrete Saw should be cleaned following every
use.
2. Using a garden hose or pressure washer is not advised as it can force water
into the air cleaner or muffler opening.
3. Use care when cleaning around electrical components.
NOTE:
(A)
Verify the engine is off and cool
before beginning to clean. Clean
the saw with soap and water.
(B)
Clean around the Console.
(C)
Clean the Depth Control Screw
and lubricate as needed.
(D)
Clean water system outlets, includ-
ing water tubes in blade guard.
(E)
Clean the remainder of the exte-
rior surface (except the engine).
Emergency Engine Shutdown
(A)
Place Engine Master Switch in
the OFF position.
(B)
Move the Throttle Lever to lower
blade speed. Place Fuel Valve in
the OFF position.