MK Diamond MK-1600 Series - Manual (Page 23)

23
(J)
Install the Blade Shaft Cover.
• Always turn the master engine switch to the off position.
• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
MK-1600 MAINTENANCE
New Maintenance
Perform the following after initial purchase and operation of the saw.
(A)
Change engine oil after
first month or first 20 operating
hours (See Engine Manual).
(B)
Check and adjust tension on
all belts following first
48 hours of operation
(See Belt section).
MAINTENANCE SAFETY
(K)
Remove the Pointer.
(L)
Install the Pointer on the oppo-
site side, next to Blade Guard.
(M)
Verify the stop Clip is installed as
shown.