Mk-1600 maintenance – MK Diamond MK-1600 Series User Manual
Page 24
Advertising
24
MK-1600 MAINTENANCE
Maintenance Following Use
The following maintenance should be performed following each use.
(A)
Shut down the Engine. Let saw
cool before proceeding.
(B)
Check Air Filter
(See Engine Manual).
(C)
Lubricate the Grease Fitting.
(D)
Lubricate the pivot point of the
Pointer.
(E)
Lubricate the Cooling
Supply Valve.
(F)
Verify the tightness of all bolts
and screws. Clean the saw (ex-
cept the engine) with soap and
water.
Weekly (50 hours) and Monthly (200 hours)
The following should be performed monthly. Items should be lubricated using waterproof grease.
(A)
Change engine oil every 100
hours. Refer to Engine Manual
for details.
(B)
Lubricate the Depth Control
Screw (Monthly).
(C)
Lubricate the Blade Shaft Bear-
ings (Monthly).
Advertising