MK Diamond MK-1600 Series - Manual (Page 30)

30
(J)
Clean and verify the alignment
of the Engine and Blade Shaft
Pulleys.
MK-1600 MAINTENANCE
(K)
Install new belts onto the Engine
Blade Shaft Pulleys.
(L)
Verify the belts are seated in all
grooves of the Engine and Blade
Shaft Pulleys.
(N)
Check belt for proper tension
(Proper tension is approxi-
mately 1/8-inch deflection of the
belt).
(P)
Tighten the Engine Mounting
Bolts.
(Q)
Install the Belt Guard and Belt
Guard Retaining Bolts.
(R)
Install the Blade (See Blade
Installation section).
(O)
Repeat Steps L and M until
proper tension is achieved.
(M)
Tighten the Engine Tension Arm
Nuts.