MK Diamond MK-1600 Series - Manual (Page 28)

28
(E)
Tighten Blade Retaining Bolt
while holding the Blade Shaft
steady.
(A)
Open the Blade Guard Cover.
Diamond Blade Removal
(D)
Install the new Blade, Retaining
Bolt and Outer Flange.
(B)
Remove the Blade Shaft Nut and
the Outer Flange.
(C)
Remove blade.
For all Engine related maintenance and troubleshooting refer to the Engine Manual.
MK-1600 MAINTENANCE
Spark Plug Adjustments and Replacement
(A)
When installing the Spark Plug,
ensure the threads are aligned with
the threads in the engine so as not to
“cross-thread” the plug.
CAUTION DO NOT work around the engine while hot.