Daily inspections – MTS Landmark System User Manual

Page 115

Advertising
background image

Daily Inspections

Before the start of each day’s testing, do a quick inspection of the load unit. Following are typical things
that should be checked daily:

•

Ensure that there are no leaks from lifts or locks.

•

Check the drip pan and ensure that there are no leaks from the actuator, hydraulic service manifold,
servovalve, or accumulators.

•

Ensure that electrical connections are tight, with no frayed or poorly routed cables.

•

Ensure that hoses are routed properly, not wearing, and the fittings are not leaking.

•

Hoses must be routed as to avoid direct heat sources, moving or abrasive equipment.

•

Check actuator speed control functionality.

If any problems are encountered, they should be repaired before operating the load unit.

MTS Landmark Test System Operation | 115

Maintenance

Advertising