MTS Landmark System - Manual (Page 92)

Run the Example HCF Test
Running the example HCF (high cycle fatigue) test consists of the following steps:
a) Open the MPX Application (p. 92)
b) Select the Test (p. 92)
c) If Necessary, Correct Any Resource Errors (p. 93)
d) Create a New Test Run (p. 93)
e) Run the Test (p. 94)
f) Review the Results (p. 95)
g) Generate a Report (p. 96)
h) Save the Test and Minimize MPX (p. 96)
Open the MPX Application
Open the MTS Multipurpose (MP) Express application.
Select All Programs > MTS TestSuite > Multipurpose Express.
Select the Test
Select the Example HCF Force Test.
92 | MTS Landmark Test System Operation
Running the Example HCF Test