MTS Landmark System - Manual (Page 91)

It is common practice to use the Scope and Meters from the Station Manager application to show what
is happening on the physical equipment. Ensure that the Scope and Meters you set up earlier are up
and running.
Minimize Station Manager
The Station Manager application must be running underneath the MPX application in order to run tests.
Minimizing the Station Manager application clears the desktop while leaving it running for the MPX
application.
1. Turn Exclusive Control off by clearing the check box.
2. Minimize the Station Manager application.
Click the minimize button in the upper right corner of the Station Manager application.
3. Verify that Station Manager is still running by checking for it in the task bar.
You can maximize Station Manager at any time by clicking the Station Manager button in the task bar.
MTS Landmark Test System Operation | 91
Running the Example HCF Test