Omnitron Systems Technology iConverter 1-Module Power Chassis - Manual (Page 2)

Page 2 Page 3
Warning
The operating description in this Instruction Manual is for use by qualified personnel only. To
avoid electrical shock, do not perform any servicing of this module other than that contained
in the operating instructions, unless you are qualified and certified to do so by Omnitron
Systems Technology, Inc.
Caution
All user-required operations can be performed without opening the chassis. Never
attempt to open or remove the cover or tamper with the chassis. There are no user replaceable
or serviceable parts in this unit. Equipment is not intended to be installed and used in a place
(home, school, or public area) accessible to the general population.
Warranty
This product is warranted to the original purchaser against defects in material and
workmanship for a period of TWO YEARS from the date of shipment. A LIFETIME warranty
may be obtained by the original purchaser by REGISTERING this product with Omnitron
within 90 days from the date of shipment. TO REGISTER, COMPLETE AND MAIL OR FAX
THE ENCLOSED REGISTRATION FORM. Or you may register your product on the Internet
at http://www.omnitron-systems.com. During the warranty period, Omnitron will, at its option,
repair or replace a product which is proven to be defective.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer’s
expense. Omnitron will pay the shipping charge to return the product to Buyer’s designated
US address using Omnitron’s standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate use
and/or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-supplied
interfacing, unauthorized modifications or tampering with equipment (including removal of
equipment cover by personnel not specifically authorized and certified by Omnitron), or
misuse, or operating outside the environmental specification of the product (including but
not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or improper site
preparation or maintenance. No other warranty is expressed or implied. Omnitron specifically
disclaims the implied warranties of merchantability and fitness for any particular purpose.
Exclusive Remedies
The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall
not be liable for any direct, indirect, special, incidental, or consequential damages, whether
based on contract, tort, or any legal theory.
iConverter
1-Module Power Chassis User Manual
1. 0 GENERAL DESCRIPTION
The 1-Module iConverter Power Chassis supports a single iConverter module and is powered
by an external AC power adapter or an external DC power source (20 to 60VDC).
Fig. 1 1-Module Power Chassis (Shown without modules installed)
This User Manual describes the following models:
Chassis Type
1-Module
Chassis
US AC
Adapter
1-Module
Chassis
Universal AC
Adapter
1-Module
Chassis
US AC
Adapter
1-Module
Chassis
Universal AC
Adapter
1-Module
Chassis
48VDC
1-Module Chassis
8240-1
(3.3 Watts)
8240-2
(3.3 Watts)
8242-1
(8.3 Watts)
8242-2
(8.3 Watts)
8242-9
(8.3 Watts)
1-Module Chassis
with Dying Gasp
Support
8241-1
(5 Watts)
8241-2
(5 Watts)
8243-1
(8.3 Watts)
8243-2
(8.3 Watts)
8243-9
(8.3 Watts)
Wall-Mount
Hardware Kit
8249-0
DIN Rail
Mounting Kit
8250-0
NEBS Grounding Kit N/A 9123-0
For wide temperature (-40 to 60 o C) add a “W” to the end of the model number.
Consult factory for extended temperature (-40 to +75 o C) models.
1.1 Dying Gasp Trap
The 8241-1, 8241-2, 8243-1, 8243-2 and 8243-9 chassis feature Dying Gasp Trap, which
reports loss of power input or chassis power supply failure. This feature requires an iConverter
management module be installed in the chassis. When power failure occurs, the chassis
reserves enough power to keep the installed module running in order to send a final SNMP
alert to the management software.