Opticon PHL 7200 User Manual - Manual (Page 29)

OPTICON
User's manual
PHL-7000 series
2-10
2.3.2 Charging the battery pack with Power Adapter
1. Connect the power cord to the power adapter.
2. Plug in the connector of the power adapter to the PDT.
3. Connect the power cord to a power source.
Figure 2-11 Charging with power adapter (PHL-7100 shown)
4. Charging time: to charge the battery pack for the first time, it needs approximately 6
hours. Subsequent charging time is approximately 4 hours.
• When charging the battery pack, the charge LED indicator on the PDT turns on
Red .
• After the battery pack is fully charged, the charge LED indicator turns to Green .