Item & function, Repeat ” tab ( figure 3-54 ), Test your new setting – Opticon PHL 7200 User Manual User Manual
Page 97: Tap “ ok ” to exit the “ keyboard ” tab
Advertising
OPTICON
User's manual
PHL-7000 series
3-34
3.2.10 Keyboard
ICON
ITEM & FUNCTION
•
“Repeat” Tab (Figure 3-54) :
9
To change the amount of time between depressions before
repetition starts, adjust the Repeat delay slider
9
To change the repeat rate, adjust the Repeat rate slider.
9
Test your new setting.
9
Tap “OK” to exit the “Keyboard” Tab.
Table 3-18 Keyboard
Figure 3-54 Keyboard Properties
Advertising
This manual is related to the following products: