Opticon PHL 7200 User Manual - Manual (Page 74)

OPTICON
User's manual
PHL-7000 series
3-11
Thereafter the display will look like :
Figure 3-13 Prefix : Selected character ‘U’ for UPC-A.
Repeat these steps for the characters
‘P’, ‘C’ and ‘A’.
Thereafter the display will look like :
Figure 3-14 Prefix : Selected characters ‘UPCA’ for UPC-A.
If the bar code reader reads an UPCA label with data ‘071589812309’, it will be send to the
application as : ‘UPCA071589812309<CR>’ where <CR> is the default suffix ASCII
character <CR>.