Opticon PHL 7200 User Manual - Manual (Page 77)

OPTICON
User's manual
PHL-7000 series
3-14
3.2.1.5 Read Mode TAB
With this option several read modes can be changed.
Figure 3-17 Read mode options.
Field name Description
Trigger repeat This option makes it more easy to select a single bar code
from a sheet filled with barcodes. If the trigger switch is
pressed once, the laser beam is on during the configured read
time. The laser beam can now be moved to the required bar
code. If the trigger switch is pressed again, the bar code is
decoded and transmitted. If the read time timer expires, the
laser switches off and the trigger sequence should be
repeated. If the read time is set to zero, then if the trigger
switch is pressed, the laser is on, but does not accept bar
codes. As soon the trigger switch is released, the barcode is
decoded and transmitted. Default is disabled.
Redundancy This is the number of times that a label must be correctly
decoded before it is transmitted. Selecting a higher
redundancy count makes reading slower, but is reduces the
probability of reading errors, especially when labels of poor
definition are used.