Opticon PHL 7200 User Manual - Manual (Page 65)

OPTICON
User's manual
PHL-7000 series
3-2
3.2.1 BarCode Settings
ICON ITEM & FUNCTION
•
Start bar code settings tool :
9 Enable or disable bar code scanner
9 Select bar code symbologies
9 Select prefixes and suffixes
9 Select quiet zone options
9 Select read mode options
Table 3-1 Bar code settings
3.2.1.1 Basic TAB
In the “Basic tab” the bar code reader behavior can be changed.
Figure 3-2 Basic Tab
Field name Description
Enable bar code reader Enable or disable the bar code reader.
Default is enabled.
Beep After Scan OK Select the number of beeps after scanning a bar
code which is successfully decoded by the bar
code reader.