Opticon PHL 7200 User Manual - Manual (Page 30)

OPTICON
User's manual
PHL-7000 series
2-11
2.3.3 Charging the battery pack with IRU-7000
CAUTION: IRU-7000 power adapter (5VDC/6.5A) is different from PDT power adapter
(5VDC/2.6A). Please use the IRU-7000 Cradle power adapter only.
a) Leave the battery pack inside the PDT :
1. Connect the power cord to the power adapter
2. Plug in the connector of the power adapter to the IRU-7000
3. Connect the power cord to a power source
4. Insert the PHL-7100 into the IRU-7000. In case of PHL-7200 insert the support bracket in
IRU-7000 first, thereafter insert PHL-7200 in IRU-7000.
Figure 2-12 Charging with IRU-7000 cradle
• When charging the battery pack, the charge LED indicator on the PDT turns on Red .
• After the battery pack is fully charged, this LED indicator turns to Green .