RKI Instruments SC-01 - Manual (Page 10)

10 • IrDA Downloading Cable
5. Deselect the selection box for “Use Wireless Link to transfer
images from a digital camera to your computer.”
6. Click OK.
7. Close the Control Panel window.
Using a USB or Serial Port With an IrDA Cable
Installed
When an IrDA cable is installed on a USB or serial port, that port
is always being used by the cable. If you need to use that port
for another device, you must disable the IrDA/serial cable or
IrDA/USB cable using Windows
®
and then shut down your
computer before disconnecting it, starting your computer up
again, and then using the port with another device or cable. For
example, if you have an IrDA/Serial cable installed in a serial
port and want to download a different device using a standard
straight through serial cable, you will need to disable the IrDA
cable, remove it and install the straight through serial cable, then
restart your computer. When you wish to download the SC-01
Figure 2: Image Transfer Tab
Deselect
this box