RKI Instruments SC-01 - Manual (Page 49)

Viewing, Printing, Exporting, and Deleting Data in the Data Window • 49
logged at 4:14:38 PM is the average reading over that one
minute period.
• Events are displayed on the screen with the time of the
event. Events are displayed whether they occurred at
scheduled log times or in between them. Events include
gas alarms such as a warning condition, trouble conditions
such as a failed sensor or failed calibration, and an
indication that the unit is returning to “normal” condition
after an alarm has been reset using the POWER button on
the SC-01.
• If you click the Summary button, the data window will split
into two frames, one above the other, with the data table in
the lower frame and the session summary information
shown in the upper frame. The session summary frame is
the same as the one shown in the lower right frame in
Figure 36.
8. When the data is viewed in table format, if you move the
cursor over an alarm event, it will change into a small symbol
that looks like an alarm trend data file while it is kept over the
alarm event.
If you click on the event, the corresponding alarm trend data
file will be opened and displayed in place of the interval trend
data file. No control buttons will be visible along the right side
Figure 38: Alarm Trend Cursor Symbol
Alarm Trend
Cursor Symbol