RKI Instruments SC-01 User Manual
Page 11
Advertising
IrDA Downloading Cable • 11
again, remove the straight through cable and reconnect the IrDA
cable, enable the IrDA cable using Windows
®
, and then restart
your computer. See your IrDA cable and Windows
®
documentation for instructions to enable and disable an IrDA
device. In general, you can enable or disable a device by going
to the Control Panel, double clicking System, selecting the
Hardware Tab, clicking Device Manager, double clicking the
IrDa cable under Infrared Devices, and making the appropriate
selection in the Device usage field. The process may differ
slightly in your particular Windows
®
system.
Advertising