RKI Instruments SC-01 - Manual (Page 34)

34 • Viewing, Printing, Exporting, and Deleting Data in the Data Window
are grouped under the SC-01 icon in the upper left corner of the
frame. If the data folders are not visible, double click the icon to
make them visible. If no data has been saved, then no folders
will appear when the SC-01 icon is double clicked.
The lower left frame contains two selection boxes for organizing
data. If neither of the boxes are selected, then the data is
organized as shown in Figure 22. The data may be organized by
either serial number, user ID, or both serial number and user ID.
Click the selection box or boxes in the lower left frame to
organize the data as desired.
NOTE: In the examples that follow, the data will be shown
organized by serial number. If you do not select any of
the organization boxes or select the Station ID box
instead of or in addition to the Serial No. box, your Data
window will look slightly different.
The upper right frame shows the contents of a data folder that is
selected in the Data frame. The lower right frame shows the
summary information for a data file that is selected in the upper
right frame.
The View Data control button is located at the bottom of the
lower right frame. The View Data button becomes active when a
data file is selected in the upper right frame. Clicking the View
Data button opens the selected data file and displays the data.
NOTE: If data is being viewed and the data folders are left open
before instrument downloading is done, close all folders
after downloading and re-open them to be able to view
newly downloaded files.
Calibration History
The SC-01 is capable of saving calibration information for up to
the 20 most recent calibrations. This calibration history is
retrieved by the Data Logger Management Program when a
complete download is performed. Instrument calibration history
is available in two separate locations. The information regarding
the most recent successful calibration for each downloaded