RKI Instruments SC-01 - Manual (Page 21)

Downloading Data from the SC-01 • 21
calibration, and the current date before attempting to
connect to the computer.
5. If the CAL. LIMIT menu item in Setup Mode is turned off, the
SC-01 shows “WARMUP” in the upper left of the LCD for a
few seconds, then displays the current date for a few
seconds before attempting to connect to the computer.
CAUTION: If the instrument gives a low battery warning or
dead battery alarm, change the alkaline batteries
before attempting to download data. See the SC-01
Operator’s Manual for the battery alarm indications.
6. If a successful connection between the SC-01 and the
computer occurs, the SC-01 displays the screen shown on
the left in Figure 11 below, the Connect light in the program’s
Download window turns green after a few seconds and “SC-
01 Connection Successful.” displays in the Download State
area of the Download window as shown on the right in
Figure 11 below.
In addition, the Windows
®
icon tray will indicate that a
wireless connection is in effect.
7. If you selected Automatic Download, the downloading
process begins automatically after a successful connection
is made.
If Automatic Download is not selected, the Complete
Download, Instrument Information, and Power Off
download command buttons become active.
Figure 11: SC-01 and Program Connection Message
TRANSMIT
SC-01 Display Program Indication