RKI Instruments SC-01 - Manual (Page 19)

Downloading Data from the SC-01 • 19
Downloading Data from the SC-01
You have the option of downloading data manually or
automatically. If you want to download data using the automatic
download feature, click the Automatic Download selection box in
the Download window before attempting to download data from
the SC-01. Remember that if Automatic Download is selected,
the Instrument Information window will remain blank and the
SC-01 will turn off automatically after the data is downloaded. If
you want the data in the SC-01 to be cleared automatically after
an automatic download, select the Automatic Data Removal
box. The Automatic Data Removal box is only available for
selection if the Automatic Download box is selected.
To download data from a SC-01:
1. Launch the SC-01 Data Logger Management Program (see
“Launching the Program” on page 12). The Download
window displays.
2. Place the SC-01 within an inch or two of the infrared port on
your computer aligning the infrared port on the side of the
SC-01 with the infrared port on your computer.
If your computer does not have a built in infrared port, place
the SC-01 within an inch or two of the infrared port on the
IrDA adapter cable as shown in Figure 10 below, aligning the
infrared port on the side of the SC-01 with the infrared port
on the cable.
Figure 9: Automatic Download Selection Box
Click here for
automatic
downloads