SATEC BFM136 - Manual (Page 28)

‎Chapter 3 BFM136 Display Operations Navigating in Menus
28 BFM136 Branch Feeder Monitor
Navigating in Menus
The BFM136 setup is menu-driven. To enter the setup menus, press the
SELECT button for more than 5 seconds.
Entering Numbers
Each digit in numbers is adjusted separately with the UP/DOWN buttons. A
brief press on the button increments or decrements the highlighted digit by
one. A highlighted digit is flashing twice per second. To move to the next
digit, press briefly the SELECT button.
When the number is set to a desired value, press briefly the ENTER button
to store your new setting.
Entering a Password
The setup menus are secured by an 8-digit user password. If the password
entered is correct, you will move to the main menu, otherwise you will return
to the display mode.
Selecting Menus
The main menu is represented by two entries; the left item shows a menu
list, while the right item is an assisting exit window that allows easy returning
to the display mode. Flashing highlights a currently active menu item (in the
following diagrams, a highlighted item is pointed out by using a bold font). To
highlight a desired menu item, press briefly the SELECT button.
To select a menu entry from the menu list:
1. Highlight the left item by briefly pressing the SELECT button if it is not
highlighted yet.
2. Scroll through the menu list by briefly pressing the UP and DOWN
buttons until the desired menu entry appears.
3. Press the ENTER button.
To exit the main menu:
1. Highlight the Exit item by briefly pressing the SELECT button.
2. Press the ENTER button.
Enter Password
00000000
Options Exit

COM1 Exit
ENTER
COM1 Protocol
Modbus RTU
Options Exit
Options Exit
ENTER
SELECT