SATEC BFM136 - Manual (Page 34)

‎Chapter 3 BFM136 Display Operations Menu Operations
34 BFM136 Branch Feeder Monitor
Label Parameter Options Default Description
Country Country code Default, or
country name Default Defines a currency and
calendar settings. The default
setting stands for the U.S.A.
Daylight Daylight saving
time (DST)
option
Disabled,
Enabled
Disabled When DST is disabled, the
RTC will operate in standard
time only. When enabled, the
BFM136 will automatically
update the time at 2:00 AM at
the pre-defined DST switch
dates.
DST Mon DST start month January-
December
April The date when Daylight
Saving Time begins. The DST
switch point is specified by the
month, week of the month and
weekday. By default, DST
starts at 2:00 AM on the first
Sunday in April of each year.
DST
Week DST start week
of the month First, Second,
Third, Fourth,
Last First
DST Day DST start day of
the week
Sunday-
Saturday
Sunday
End Mon DST end month January-
December
October The date when Daylight
Saving Time ends. The DST
switch point is specified by the
month, week of the month and
weekday. By default, DST
ends at 2:00 AM on the last
Sunday in October of each
year.
End Week DST end week
of the month
First, Second,
Third, Fourth,
Last
Last
End Day DST end day of
the week Sunday-
Saturday Sunday
Meter Security
This menu allows you to change the user password and define a level of the
device security for accessing the BFM136 through communication ports.
To enter the menu, select the Access entry from the main menu, and then
press the ENTER button. For instructions on navigating in the menu, see
Viewing and Changing Setup Items .
The following table lists available options.
Label Parameter Options Default Description
Password User
password 0-99999999 Factory set
(consult
your dealer) A user password for
accessing the device menus.
It is effective for the display
and for all ports
Com.Pass Remote
password
checking
OFF, ON ON Controls password checking
when the BFM136 is
accessed through
communication ports
Display Settings
This menu allows you to configure options for the BFM136 display.
To enter the menu, select the Display entry from the main menu, and then
press the ENTER button.
For instructions on navigating in the menu, see Viewing and Changing Setup
Items .
The following table lists available options.
Label Parameter Options Default Description
Update Display update
rate 1-10 sec 1 sec Defines the interval between
display updates
Scroll Auto scroll
interval None, 2-15
sec None Defines the scroll interval for
the main data display or
disables auto scroll
Auto Ret Auto return to
the main screen Disabled,
Enabled Enabled Enables automatic return to
the main display if no buttons
are pressed for 5 minutes
Access Exit
Access Password
9
ENTER
Display Exit
Display Update
1
ENTER