SATEC BFM136 - Manual (Page 69)

‎Appendix E Data Scales
BFM136 Branch Feeder Monitor 69
Appendix E Data Scales
The maximum values for volts, amps and power in the BFM136 setup and in
communications are limited by the voltage and current scale settings. See
Basic Meter Setup in Chapter 4 on how to change the voltage scale in your
meter.
The following table defines the meter data scales.
Scale Range Notes
Maximum voltage (V max) Voltage scale  PT Ratio, V The default voltage
scale is 600V
Maximum current (I max) HACS Primary current  2, A The default HACS
primary current is
50A
Maximum power 1 V max  I max  2, W
1 Maximum power is rounded to whole kilowatts. With PT=1.0, it is limited
to 9,999,000 W.