SATEC BFM136 - Manual (Page 54)

‎Chapter 4 PAS Application Software Administration
54 BFM136 Branch Feeder Monitor
1. Click on the corresponding button, and then confirm your command.
2. If a target has more than one component, you are allowed to select
components to reset.
3. Check the corresponding boxes and click OK.
Administration
PAS allows you to remotely change the password or network security in your
BFM136 . Use the device base address to access your device.
To change the password, select a device site from the list box on the PAS
toolbar, check the On-line button, click Administration from the monitor
menu, and then select Change Password.
To change the password, type in a new 8-digit password, repeat the
password in the Confirm box, and then click Send.
Upgrading Device Firmware
Your meter has upgradeable firmware. If you need to upgrade your device,
you can download a new firmware file to the meter through PAS.