Maintenance, Cleaning, Troubleshooting – Brother PE 300S User Manual
Page 100: Cleaning the screen, Cleaning the sewing machine surface, Cleaning the shuttle
97
Maintenance
CLEANING
MAINTENANCE
Cleaning the screen
CAUTION
Disconnect the power cord from the wall socket before cleaning, otherwise injury or electric
shocks may result.
If the front panel is dirty, wipe it gently with a soft, dry cloth. Do not use any organic solvents or detergents.
Cleaning the sewing machine surface
If the surface of the sewing machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly and
then wipe the surface. After cleaning it once in this way, wipe it again with a dry cloth.
Cleaning the shuttle
Sewing performance will be affected and bobbin thread detection will become unreliable if dust collects in the
shuttle. It should be kept clean at all times.
1. Turn off the power and remove the presser foot holder and the
needle.
2. Loosen the screws.
3. Remove the needle plate.
1
Needle plate
5
3
1