If the thread breaks during embroidery, If the upper thread breaks – Brother PE 300S User Manual
Page 92
89
IF THE THREAD BREAKS DURING EMBROIDERY
If the upper thread breaks
1. Stop the machine, raise the needle and foot, and rethread the
machine.
·
If the bobbin thread breaks
1
Cut the upper thread, raise needle and foot, and re-
move hoop.
2
Reset the bobbin thread, then reattach hoop.
2. Press “
” key.
4. Press “
” key to go back a few stitches before the thread
broke.
*
If unable to return to the point the thread broke,
Press “
” key to go to first stitch of that color and then “
” key to advance near the point of the thread break-
age.
Returns to the first stitch of the color without sew-
ing.
Advances to the first stitch of the next color with-
out sewing.
Goes back one stitch at a time. Hold the button
down to change from 6 stitches at a time to 9
stitches at a time.
Goes forward one stitch at a time. Hold the but-
ton down to change from 6 stitches at a time to 9
stitches at a time.
3. Press “
” key.