When starting over from the beginning, Continuing after the power shuts off – Brother PE 300S User Manual
Page 93
90
5. Lower the presser foot and push “START/STOP” button.
·
The machine might not start sewing right away after press-
ing “
” key or “
” key . This is nothing to be
alarmed about. Just push “START/STOP” button again.
When starting over from the beginning
1. Press “
” key to return to the first color and place the
needle over the starting position.
2. Lower the presser foot and push start.
Continuing after the power shuts off
Example
Continuing from a position within the second color.
1. Select the pattern, press “
” key and then press
“
” key.
2. Press “
” key to go to the first stitch of the second color.
3. Press “
” key to advance to a position a few stitches
before you left off.
4. Lower the foot and press start.
Note
If you change the pattern placement on the layout screen and
continue sewing, first move the position on the layout screen by
the same degree before carrying out the above procedure.