Brother PE 300S - Manual (Page 56)

53
Contents
Setting Up
Basic Sewing
Machine
Operation
Utility Stitches
Embroidering
Maintenance
Troubleshooting
Error
Messages
Sewing Chart
Patterns
(Programmed
in Machine)
Patterns
(Memory Card)
APPLIQUES A
Preparations:
Attach the applique to the fabric. The applique should be at-
tached with fabric glue or a basting stitch so that it will not move
during sewing.
1 Applique
2 Fabric glue
1 2 3
1 Applique
2 Zig zag
3 Fagoting
1. Attach presser foot “J”. Make sure that the needle drop point is
just outside the applique and then start sewing.
1 Applique
Sewing the applique around corners
1. Stop the machine and position the needle just outside the
applique.
2. Raise the presser foot and turn the fabric as needed to keep
the correct needle position.
1
2
1
1
1
2. Finish
1 Needle drop point