Brother PE 300S User Manual
Page 25
22
6. Run thread through the guide above the needle.
HOW TO USE THE AUTOMATIC NEEDLE THREADER
CAUTION
-
Be careful not to turn the machine on while using the
automatic needle threader.
-
Use the automatic needle threader with size #11-16
sewing machine needles. Use the quick reference chart
(p. 35) to make sure you're using the right needle.
3
While gently holding the thread, pull the needle threader
lever toward you.
4
Simultaneously release both thread and automatic needle
threader lever. The threading hook will pass the thread
through the eye of the needle.
5
Pull the thread towards the rear to finish the upper thread-
ing.
CAUTION
Be careful not to force the thread and bend or damage the
needle.
1
Lower the needle threader lever all the way down using
your left index finger. (Pass thread to the right. )
1
Guide (Large hook)
2
Push the automatic needle threader lever to the back, pass
the third hook through the eye of the needle, then scoop
the thread up from below and through the third hook.
2
Needle threader lever
3
Thread hook
7. Pass the thread underneath the presser foot and pull it out
from the rear of the machine by about 5 cm (13/64”).
1
2
3