Starting and stopping sewing, Start/stop” button foot controller, Foot controller – Brother PE 300S User Manual
Page 26: Start/stop” button
23
1. Place the fabric under the presser foot, lower the presser foot,
and then press the “START/STOP” button. The sewing ma-
chine starts sewing.
*
Adjust speed by sliding the speed control lever.
*
Sewing continues at low speed while the button is pressed.
2. And then press it once more to stop the machine.
Foot controller
CAUTION
Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or
an electric shock.
1. Turn the power off and plug the foot controller plug into the
jack on the back of the machine.
*
The foot controller can not be used during machine em-
broidery.
1
Foot controller
2
Foot controller jack
2. When the foot controller is depressed lightly, the machine will
run at a low speed.
*
The speed selected by the speed control lever on the body
of the machine will be the maximum speed of the foot con-
troller.
1
Faster
3. When pressure on the foot controller is released, the machine
will stop.
*
When the foot controller is being used, the “START/STOP”
button has no effect on the sewing.
Note (For U.S.A. only)
Foot controller: Model N5V
This foot controller can be used for sewing machine model PE-
300S.
1
2
“START/STOP” button
STARTING AND STOPPING SEWING
1