Rockwell Automation 839E Solid-State Flow Sensors - Manual (Page 13)

839E Solid-State Flow Sensors User Manual
Pub #10000004735 Ver 03, May 2012 11
Navigating through the programming menu
Figure 9 Navigating through the programming menu
A Function group selection
B Function selection
➊ Enter the programming menu:
- Press and hold the E key for longer than 3 sec.
➋ Once in programming mode (BASE will be displayed), toggle between the Function
groups with the + and - keys
➌ To enter the Function group, press the E key
➍ Enter or change parameters with the + or - key.
- Then press the E key to return to the “Function” option
➎ Press the E key several times to return to the “Function group”
➏ Jump back to the measuring position (Home position)
- Then press the E key for longer than 3 sec.
➐ To save changes, choose YES or NO with the + or - key
- Confirm with the E key
Changes take effect only when you choose YES when asked
to save the data.
ATTENTION