Rockwell Automation 839E Solid-State Flow Sensors - Manual (Page 19)

839E Solid-State Flow Sensors User Manual
Pub #10000004735 Ver 03, May 2012 17
Function
group
Function
(display) Description
OUT and
OUT2
(continued) Can be set anywhere between 0…99 sec. in
increments of 1 second.
Factory setting: 0 sec.
SERV
(Service
functions) Enter the device locking code.
Locking, only visible with valid operating code.
Resetting of all settings to factory settings.
Configuration counter, increments each time the
configuration is changed.
Display of last error to occur.
Simulation switch output 1: on/off with display,
optionally corresponding to switch output 2.