Original instructions, Ec declaration of conformity, Guardshield™ type 4 safety light curtains – Rockwell Automation 440L GuardShield Type 4 and Remote Teach User Manual User Manual
Page 40
GuardShield™ Safety Light Curtain User Manual
38
R
Original instructions
1 / 2
Document Control Number: SEN-0339-H-EN (Original)
EC Declaration of Conformity
and the authorised representative established within the
Community
Rockwell Automation BV
Rivium 1e Straat, 23
2209 LE Capelle aan den IJssel
Netherlands
GuardShield™ Type 4 Safety Light Curtains
Allen-Bradley / Guardmaster 440L Series
(reference the attached list of catalogue numbers)
Product Safety Function:
440L Series Type 4 safety light curtains are active optoelectronic protection
devices (AOPDs) with resolutions of 14mm and 30mm, or multiple beams
with various beam spacings. These safety light curtains are self-checking
and cascadable, and are suitable for applications up to Safety Category 4
(EN ISO 13849-1) and SIL3 (EN 61508).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance
with the installation instructions contained in the product documentation:
e
v
i
t
c
e
r
i
D
C
M
E
C
E
/
8
0
1
/
4
0
0
2
e
v
i
t
c
e
r
i
D
y
r
e
n
i
h
c
a
M
C
E
/
2
4
/
6
0
0
2
and that the standards and/or technical specifications referenced below have been applied:
EN 55022:1998 +A1:2000
+A2:2003
Information technology equipment – Radio disturbance characteristics -
Limits and methods of measurement
Safety of machinery – Electro-sensitive protective equipment – Part 1: General
requirements and tests
CLC/TS 61496-2:2006
IEC 61496-2:2006
Safety of machinery – Electro-sensitive protective equipment – Part 2:
Particular requirements for equipment using active opto-electronic protective
devices (AOPDs)
Functional safety of electrical/electronic/programmable electronic safety-
related systems
Safety of machinery – Functional safety of safety-related electrical, electronic
and programmable control systems
Safety of machinery – Safety related parts of control systems – Part 1: General
principles for design
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC
Machinery Directive has been certified by:
TÜV NORD CERT GmbH & Co.
KG
Langemarckstr. 20, D-45141
Essen, Germany
ID-No.: 0044
EC Type Examination Certificate No.
44 205 10 383326 000
Manufacturer:
Authorised Representative in the Community:
Signature
Signature
Name:
Daniel L. Nachtigall
Name:
Viktor Schiffer
Position:
Technical Leader – Certification Engineering
Position:
Engineering Manager
Date:
Place:
17-Jun-2010
Date:
Place:
21-Jun-2010
The undersigned, representing the manufacturer
Rockwell Automation, Inc.
2 Executive Drive
Chelmsford, MA 01824
USA
Herewith declare that the Products:
Product identification (brand and
catalogue number/part number):
EN 61496-1:2004 + A1:2008
EN 61508:2001
EN 62061:2005
EN ISO 13849-1:2008 / AC:2009
The authorised representative is authorized to compile the Technical File.
Milwaukee, WI USA
Haan, Germany